Mobile disinfection chamber model "COMFORT

Yes, the measuring sensors of the disinfection chamber log all relevant process parameters at time intervals of 30 seconds. The digital protocol is transferred as a PDF document to the USB stick connected to the chamber. You can then conveniently read out this generated disinfection certificate/log via computer or notebook.

You can read about the advantages of the biocidal agent hydrogen peroxide or the disadvantages of physical UV-C disinfection in our blog post here.

Material damage and damp/wet condensation can be excluded due to the interval-based fogging process. An overview list of tested and disinfectable products is available on request from our state-certified disinfectors.

The advantages of aHP fogging technology over gaseous or vaporised hydrogen peroxide disinfection processes are significant and numerous. These include the following:

• Shorter microbiological exposure times and thus faster "fumigation cycles".
• Same disinfection results with significantly less hydrogen peroxide concentration (much lower gas loads in the disinfection chamber protect the equipment all the more reliably).
• Low-maintenance technology
• User-friendly

The advantages of cold-mist hydrogen peroxide over ozonisation / disinfection by ozone generators are of an essential nature. These include the following:

• EN 17272 certified disinfection process
• Effective even with strong biofilms on the surfaces
• In accordance with the Biological Substances Ordinance and the Hazardous Substances Ordinance as well as the associated technical regulations
• Can also compensate for sub-optimal humidity levels

Our disinfection chambers and disinfection sluices are high-end products with special electronics and high-quality materials (especially stainless V4A stainless steel). Depending on the order situation, you can calculate with production and delivery times of approximately 6 to 11 weeks from the order date.

Yes, through the automated disinfection documentation and logging, all decisive disinfection parameters are tracked. These include relative humidity, ambient temperature, ppm readings for hydrogen peroxide, etc.

Extremely robust and durable. The high-quality V4A housing is also scratch-resistant. All linked electronics and hoses are hydrogen peroxide resistant.

The disinfection chamber for automated decontamination of sensitive equipment is based on the so-called "Micro-aerosol cold fogging technology". with H2O2 concentrations below 20% (also known as "aerogenic disinfection" or internationally as "airborne disinfection"). The suspended micro-aerosols ensure complete disinfection including a highly effective, short gas phase.

The disinfection cycle lasts 60 minutes including process and reaction time. This is followed by a short aeration and deaeration phase so that the disinfection chamber can then be safely operated again by the user or reloaded.

You can sit back comfortably because our specialised technicians and disinfectors will ensure a smooth installation of the disinfection chamber at your site (in-house installation service). Depending on which model (H2O2 chamber or H2O2 airlock) you have ordered from us, the installation takes between 6 and 10 hours for 2 of our employees. In the case of specific or more complex on-site conditions, it may take longer.

To install your disinfection chamber or H2O2 sluice, you only need an exhaust air duct with at least DN 150. Thus, the mobile disinfection booth can be easily connected to your exhaust air system.

As the users / operators of the disinfection chambers usually aim for sporicidal validation (6 log step reduction), our disinfection booths are operated with Diosol 19 PURE (special stabilised hydrogen peroxide). You can read aboutthe requirements for high-performance fogging agents here...

Feel free to email us at info@diopgmbh.com and we will provide you with an individual offer free of charge and without obligation.

We currently offer the touchscreen in 4 different languages: German, English, French and Spanish. However, you are welcome to book your country-specific language via one of our language packages. 

DIOP GmbH & Co. KG has been an established and leading provider of certified disinfection automation solutions for more than 15 years. Therefore, we naturally offer you an on-site inspection appointment for a fee before you purchase a disinfection chamber. This investment will of course be refunded or credited to you upon subsequent purchase. So you do not take any risk here.